Water-cooled variable-pitch dry screw vacuum pump with a nominal pumping speed of 200 m³/h and a stated ultimate pressure of 1 Pa. The SSH200H includes nitrogen purge capability, RS-485 communication and remote I/O for industrial vacuum systems.
Description
CBVAC SSH200H Dry Screw Vacuum Pump
The SSH200H provides an oil-free pumping chamber for clean or controlled industrial processes. Its water-cooled permanent-magnet synchronous drive and purge system support continuous monitored operation within the manufacturer limits.
| Nominal pumping speed | 200 m³/h (3,333 L/min) |
|---|---|
| Stated ultimate pressure | 1 Pa |
| Motor | Water-cooled permanent-magnet synchronous drive |
| Installed / stated operating power | 5.5 kW / approximately 2.5 kW |
| Electrical supply | Three-phase 380 V or 220 V, 50/60 Hz; confirm exact version |
| Inlet / exhaust | ISO63 / KF40 |
| Cooling water stated in source record | 4–8 L/min, 0–25 °C, 3–5 kgf/cm²; Rc 3/8-inch connection |
| Nitrogen purge stated in source record | 0.1–0.2 MPa; 12–100 L/min; 1/4-inch tube connection |
| Control | RS-485 and remote I/O |
| Noise | ≤75 dB(A) under the stated conditions |
| Dimensions / weight | Approximately 930 × 400 × 570 mm / 200 kg |
| Ambient conditions | +5 to +40 °C; relative humidity ≤80% |
The original source table also listed a working endpoint below its stated ultimate pressure; that contradictory line is omitted here. Confirm the current performance curve and acceptance test for the exact configuration.
Specify gas composition, vapor and particle load, purge, cooling, power, exhaust treatment, controls and maintenance. Provide cooling-loss, overtemperature and exhaust-pressure interlocks.
